Bench Top Supplies

Features

PM20D (PM20S)

PM30D (PMS30S)

Vin 50-60 Hz (V) 85 to 264 ac 85 to 264 ac
dc (V) 120 to 370 dc 120 to 370 dc
Vout (V) 20 to 2000 20 to 3000
Iout (mA) 1 1.3
polarity + and - (+ or -) + and - (+ or -)
connector SHV SHV
auxillary output +5V, 1A +5V, 1A
  -5V, 0.25A -5V, 0.25A
  +12V, 0.25A +12V, 0.25A
  -12V, 0.25A -12V, 0.25A
auxillary connector Hirose 6 way Hirose 6 way
ripple mV (p-p) 5 5
temp coeff ppm °C-1 50 100
drawing outline 1 4
data sheet

Bench Top Power Supplies

Bench Top power supplies are recommended for research and laboratory use. They offer flexibility in terms of voltage range and output polarity. These are stand-alone units which all feature an output voltage display.

The PM20D and PM30D dual output supplies include a 4 digit LCD read out and low voltage (+-5V and +-12V) supplies. Lower cost versions, PM20S and PM30S offering only single polarity output are also available. All supplies in this range accept ac or dc input - referred to as universal supply input.

Features


• mains input
• output range up to 2000V or 3000V
• low ripple
• positive or negative HV
• overload protected
• clear display of
• output voltage
• multi-turn set dial

Specifications

These power supplies provide high voltage output ranging up to 2000V or 3000V depending on the type.

The PM20D and PM30D are dual power supplies, providing + and - output. Lower cost, single output polarity versions are also available to the same specification.
Bench Top Supplies

Features

PM20D (PM20S)

PM30D (PMS30S)

Vin 50-60 Hz (V) 85 to 264 ac 85 to 264 ac
dc (V) 120 to 370 dc 120 to 370 dc
Vout (V) 20 to 2000 20 to 3000
Iout (mA) 1 1.3
polarity + and - (+ or -) + and - (+ or -)
connector SHV SHV
auxillary output +5V, 1A +5V, 1A
  -5V, 0.25A -5V, 0.25A
  +12V, 0.25A +12V, 0.25A
  -12V, 0.25A -12V, 0.25A
auxillary connector Hirose 6 way Hirose 6 way
ripple mV (p-p) 5 5
temp coeff ppm °C-1 50 100
drawing outline 1 4
data sheet